PPTP VPN Through Cisco Pix
by admin on Apr.09, 2008, under Firewalls, Networking, VPN
Do you want your workstations to connect to PPTP VPNs through a Cisco Pix firewall without having to setup a static NAT for each one.
Are you getting the following error in your syslogs when you try:
“regular translation creation failed for protocol 47″
All you should have to do is add a new fixup protocol entry.
“fixup protocol pptp 1723″
Now assuming that you have a PAT for all traffic from inside to outside you PPTP connections should work.
There are other factors that could cause this to fail, make sure that you are on at least version 6.3 of the Pix software.
If you still have problems check your syslogs.
2,432 views
